36
Syntax
set authentication password
{
hash
|
simple
}
password
undo set authentication password
Default
No password is set for password authentication.
Views
User line view, user line class view
Predefined user roles
network-admin
mdc-admin
Parameters
hash
: Sets a hashed password.
simple
: Sets a plaintext password.
password
: Specifies the password string. This argument is case sensitive. If
simple
is specified, it
must be a string of 1 to 16 characters. If
hash
is specified, it must be a string of 1 to 110 characters.
Usage guidelines
This command is not supported in FIPS mode.
For security purposes, the password is hashed before being saved, whether you specify the
hash
or
simple
keyword.
This command is available in both user line view and user line class view:
•
If the setting in user line view is not the default setting, the setting in user line view takes effect.
•
If the setting in user line view is the default setting but the setting in user line class view is not,
the setting in user line class view takes effect.
Examples
# Set the password for password authentication on user line AUX 0 to
hello
.
<Sysname> system-view
[Sysname] line aux 0
[Sysname-line-aux0] authentication-mode password
[Sysname-line-aux0] set authentication password simple hello
When you log in again through user line AUX 0, you must enter the password
hello
to pass
authentication.
Related commands
authentication-mode
shell
Use
shell
to enable the terminal service for a user line.
Use
undo shell
to disable the terminal service for a user line.
Syntax
shell
undo shell
