30
To configure the same settings for multiple user lines, use this command to enter multiple user line
views.
Examples
# Enter the view of user line AUX 0.
<Sysname> system-view
[Sysname] line aux 0
[Sysname-line-aux0]
# Enter the views of user lines VTY 0 to VTY 4.
<Sysname> system-view
[Sysname] line vty 0 4
[Sysname-line-vty0-4]
Related commands
line class
line class
Use
line class
to enter user line class view.
Syntax
line class
{
aux
|
vty
}
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
aux
: Specifies the AUX line class view.
vty
: Specifies the VTY line class view.
Usage guidelines
To configure the same settings for all user lines of a line class, use this command to enter the user
line class view.
Some login management commands are available in both user line view and user line class view:
•
A setting in user line view is applied only to the user line. A setting in user line class view is
applied to all user lines of the class.
•
A non-default setting in either view takes precedence over a default setting in the other view. A
non-default setting in user line view takes precedence over a non-default setting in user line
class view.
•
A setting in user line view takes effect immediately and affects the online user. A setting in user
line class view does not affect online users and takes effect only for users who log in after the
configuration is completed.
Examples
# Set the CLI connection idle-timeout timer to 15 minutes in VTY line class view.
<Sysname> system-view
[Sysname] line class vty