HP EVA P6000, Руководство пользователя

Страница: 130 / 298

4. Enable CHAP for the Microsoft iSCSI Initiator.
a.
Click the General tab.
b. Click Secret in the middle of the screen.
c. Click Reset .
d. Enter the iSCSI or iSCSI/FCoE controller iSCSI Presented Target CHAP secret. For example:
hpstorageworks
.
e. Click OK .
f. Click Discovery .
•
For manually discovering iSCSI target portals:
a.
Click Add under Target Portals .
b. Enter the IP address of the iSCSI port of the iSCSI or iSCSI/FCoE controller.
c. Click Advanced .
d. Select the CHAP Login Information check box.
e. Enter the CHAP secret for the iSCSI or iSCSI/FCoE controller discovered iSCSI
Initiator in the Target Secret box. For example:
CHAPsecret01
.
f. Select the Mutual Authentication check box.
g. Click OK .
h. Click OK and the initiator completes target discovery.
•
Using iSNS for target discovery:
a.
Click Add under iSNS Servers .
b. Enter the IP address of the iSNS server.
c. Click OK .
g. Click Targets .
h. Select the appropriate target for login.
i. Click Log On .
j. Click Advanced .
k. Select the CHAP Login Information check box.
l. Enter the CHAP secret for the iSCSI or iSCSI/FCoE controller discovered iSCSI Initiator
in the Target Secret box. For example:
CHAPsecret01
.
m. Select the Mutual Authentication check box.
n. Click OK .
o. Click OK and the initiator completes normal login.
Enable CHAP for the open-iscsi iSCSI Initiator
To enable CHAP in open-iscsi, you need to edit the
/etc/iscsi/iscsid.conf
file.
1. Enable CHAP for both Discovery and Normal Session by:
node.session.auth.authmethod = CHAP
node.session.auth.authmethod = CHAP
2. Setup Username and Password for Initiator and Target for Normal Session. For Example:
# To set a CHAP username and password for initiator
# authentication by the target(s), uncomment the following lines:
#node.session.auth.username = username
#node.session.auth.password = password
node.session.auth.username = iqn.1994-05.com.redhat:fc813cac13.sanergy33
node.session.auth.password = CHAPSecret01
# To set a CHAP username and password for target(s)
# authentication by the initiator, uncomment the following lines:
#node.session.auth.username_in = username_in
node.session.auth.username_in = iqn.2004-09.com.hp.fcgw.mez50.1.01.50014380025da538
#node.session.auth.password_in = password_in
node.session.auth.password_in = hpstorageworks
130 iSCSI or iSCSI/FCoE configuration rules and guidelines