HP EVA P6000 Скачать руководство пользователя страница 165

Страница: 165 / 298

Table 23 Error Messages

(continued)

How to correct

Meaning

Status code value

Report the error to product support.

The operation cannot be performed because
the object does not exist. This can indicate
a user or program error.

27
Target Object Does Not Exist

Verify the hardware connections and
that communication to the device is
successful.

A timeout has occurred in processing the
request.

28
Timeout

Report the error to product support.

This error is no longer supported.

29
Unknown Id

Report the error to product support.

This error is no longer supported.

30
Unknown Parameter Handle

Report the error to product support.

The operation could not be completed
because one or more of the disk media had
an unrecoverable error.

31
Unrecoverable Media Error

Report the error to product support.

This error is no longer supported.

32
Invalid State

Verify the hardware connections,
communication to the device, and that

A SCMI transport error has occurred.

33
Transport Error

the management software is operating
successfully.

Resolve the condition and retry the
request. Report the error to product
support.

The operation could not be completed
because the drive volume is in a missing
state.

34
Volume is Missing

Report the error to product support.

The supplied cursor or sequence number is
invalid. This may indicate a user or program
error.

35
Invalid Cursor

Report the error to product support.

The specified target virtual disk already has
an existing data sharing relationship. This
can indicate a user or program error.

36
Invalid Target for the Operation

No action required.

There are no more events to retrieve. (This
message is informational only.)

37
No More Events

Retry the request at a later time.

The command lock is busy and being held
by another process.

38
Lock Busy

Report the error to product support.

The storage system time is not set. The
storage system time is set automatically by
the management software.

39
Time Not Set

Report the error to product support.

The requested operation is not supported by
this firmware version. This can indicate a
user or program error.

40
Not a Supported Version

Report the error to product support.

This is an internal error.

41
No Logical Disk for Vdisk

Delete the associated presentation(s)
and retry the request.

The virtual disk specified is already
presented to the client and the requested
operation is not allowed.

42
Virtual disk Presented

Report the error to product support.

The request is not allowed on the slave
controller. This can indicate a user or
program error.

43
Operation Denied On Slave

Report the error to product support.

This error is no longer supported.

44
Not licensed for data replication

165

Содержание EVA P6000











































































































































































































































































































Результаты поиска

Содержание EVA P6000

Отзывы:

Похожие инструкции для EVA P6000

Бренды по названию

Популярные бренды

HP EVA P6000, Руководство пользователя

Результаты поиска

Содержание EVA P6000

Отзывы:

Похожие инструкции для EVA P6000

Бренды по названию

Популярные бренды