Infrared board
Table 5-13
Infrared board spare part information
Description
Spare part number
Infrared board
L94506-001
Before removing the infrared board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4.
Remove the bottom cover (see
), and then remove the following components:
a.
Battery (see
b.
Solid-state drive (see
)
c.
Fan (see
)
d.
System board (see
)
Remove the infrared board:
1.
Remove the Phillips M2.0×3.0 screw (1) that secures the infrared board to the keyboard/top cover.
2.
Remove the infrared board (2) and cable.
Reverse this procedure to install the infrared board and cable.
64
Chapter 5 Removal and replacement procedures
Содержание ENVY x360 13
