Replacing or upgrading the hard drive
CAUTION:
To prevent information loss or an unresponsive system:
Shut down the computer before removing the hard drive from the hard drive bay. Do not remove the
hard drive while the computer is on, in the Sleep state, or in Hibernation.
If you are not sure whether the computer is off or in Hibernation, turn the computer on by pressing the
power button. Then shut down the computer through the operating system.
Removing the hard drive
To remove a hard drive:
1.
Save your work and shut down the computer.
2.
Disconnect AC power and external devices connected to the computer.
3.
Turn the computer upside down on a flat surface.
4.
Remove the service door (see
Removing or replacing the service door on page 62
) and the
battery (see
Inserting or removing the battery on page 60
).
5.
Loosen the 4 hard drive door screws
(1)
. Pull the cloth hard drive tab
(2)
upwards, and then
remove the drive.
Installing a hard drive
To install the hard drive:
1.
Place the hard drive into the hard drive bay,
(1)
, ensuring that the cloth tab remains on top.
64
Chapter 10 Maintenance
Содержание EliteBook 820 G1
Страница 1: ...Getting Started HP Notebook ...
Страница 4: ...iv Safety warning notice ...
Страница 10: ...x ...