manualshive.com logo in svg

HP 8719ES, Справочное руководство

Поделиться
Скачать
HP 8719ES Скачать руководство пользователя страница 188

5-61

Hardkey/Softkey Reference

Analyzer Functions

outputs a title string to any device with an HP-IB address
that matches the address set with the analyzer

commands.

This softkey is generally used for two purposes:

• Sending a title to a printer when a CR-LF is not

desired.

• Sending commands to an HP-IB device.

outputs a title string to any device with an HP-IB address
that matches the address set with the analyzer

commands. This softkey is generally used for two
purposes:

• Sending a title to a printer when a CR-LF is not

desired.

• Sending commands to an HP-IB device.

outputs a title string to any device with an HP-IB address
that matches the address set with the analyzer

 commands.

This softkey is generally used for two purposes:

• Sending a title to a printer for data logging or

documentation purposes.

• Sending commands to a printer or other HP-IB device.

is used in conjunction with other search features to track
the search with each new sweep. Turning tracking on
makes the analyzer search every new trace for the
specified target value and put the active marker on that
point. If bandwidth search is on, tracking searches every
new trace for the specified bandwidth, and repositions the
dedicated bandwidth markers.

When tracking is off, the target is found on the current
sweep and remains at the same stimulus value regardless
of changes in trace response value with subsequent
sweeps.

A maximum and a minimum point can be tracked
simultaneously using two channels and uncoupled
markers.

provides a transmission (same as S21) and reflection
(same as S11) enhanced response calibration (forward
direction). Enhanced response generates a 1-port cal for
reflection and an improved calibration over the response
cal for transmission (ET only).

 TITLE TO P MTR/HPIB

Local

 SET ADDRESSES  ADDRESS: P MTR/HPIB

 TITLE TO PERIPHERAL

Seq

 SPECIAL FUNCTIONS  PERIPHERAL HPIB ADDR

 TITLE TO PRNTR/HPIB

Local

 SET ADDRESSES  ADDRESS: PRINTER

 TRACKING on OFF

 TRAN/REFL ENH. RESP.

Содержание 8719ES




























































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды