manualshive.com logo in svg

HP 8719ES, Справочное руководство

Поделиться
Скачать
HP 8719ES Скачать руководство пользователя страница 167

5-40

Hardkey/Softkey Reference

Analyzer Functions

(Option 010 only) displays a Cartesian format of the phase
portion of the data, measured in degrees. This format
displays the phase shift versus frequency.

makes a hard copy plot of one page of the tabular listing
on the display, using a compatible HP plotter connected to
the analyzer through HP-IB. This method is appropriate
when speed of output is not a critical factor.

specifies whether the data trace is to be drawn (on) or not
drawn (off) on the plot.

specifies whether the graticule and the reference line are
to be drawn (on) or not drawn (off) on the plot. Turning

 and all other elements off is a

convenient way to make preplotted grid forms. However,
when data is to be plotted on a preplotted form,

 should be selected.

specifies whether the memory trace is to be drawn (on) or
not drawn (off) on the plot. Memory can only be plotted if it
is displayed (refer to the “Making Measurements” chapter
in the user’s guide).

specifies whether the markers and marker values are to be
drawn (on) or not drawn (off) on the plot.

supplies a name for the plot file generated by a PLOT to
disk. Brings up the TITLE FILE MENU.

toggles between fast and slow speeds.

selects plotting of all displayed text except the marker
values, softkey labels, and display listings such as the
frequency list table or limit table. (Softkey labels can be
plotted under the control of an external controller. Refer to
the programmer’s guide.)

sets the serial port data transmission speed for plots.

sends a page eject command to the plotter.

configures the port analyzer will use to communicate with
the plotter.

directs plots to the selected disk (internal or external).

directs plots to the HP-IB port and sets the HP-IB address
the analyzer will use to communicate with the plotter.

configures the analyzer for a plotter that has a parallel
(centronics) interface.

configures the analyzer for a plotter that has a serial
(RS-232) interface.

 PHASE

 PLOT

 PLOT DATA ON off

 PLOT GRAT ON off

 PLOT GRAT ON

 PLOT GRAT OFF

 PLOT MEM ON off

 PLOT MKR ON off

 PLOT NAME PLOTFILE

 PLOT SPEED [ ]

 PLOT TEXT ON off

 PLOTTER BAUD RATE

 PLOTTER FORM FEED

 PLOTTER PORT

 PLTR PORT: DISK

PLTR PORT HPIB

PLTR PORT PARALLEL

PLTR PORT SERIAL

Содержание 8719ES




























































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды