HP 8/20q, Руководство CLI

Страница: 88 / 332

88 Connection security configuration
To manage both SSH and SSL services, enter the
set setup services
command, as shown in the
following example:
8/20q FC Switch #> admin start
8/20q FC Switch (admin) #> set setup services
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
PLEASE NOTE:
-----------
* Further configuration may be required after enabling a service.
* If services are disabled, the connection to the switch may be lost.
* When enabling SSL, please verify that the date/time settings
on this switch and the workstation from where the SSL connection
will be started match, and then a new certificate may need to be
created to ensure a secure connection to this switch.
TelnetEnabled (True / False) [True ]
SSHEnabled (True / False) [False] True
GUIMgmtEnabled (True / False) [True ]
SSLEnabled (True / False) [False] True
EmbeddedGUIEnabled (True / False) [True ]
SNMPEnabled (True / False) [True ]
NTPEnabled (True / False) [False]
CIMEnabled (True / False) [False]
FTPEnabled (True / False) [True ]
MgmtServerEnabled (True / False) [True ]
Do you want to save and activate this services setup? (y/n): [n] y
Displaying SSL and SSH services
To display the status of the SSH and SSL services, enter the
show setup services
command, as
shown in the following example:
8/20q FC Switch #> show setup services
System Services
-----------------------------
TelnetEnabled True
SSHEnabled False
GUIMgmtEnabled True
SSLEnabled False
EmbeddedGUIEnabled True
SNMPEnabled True
NTPEnabled True
CIMEnabled True
FTPEnabled True
MgmtServerEnabled True
CallHomeEnabled True