HP 8/20q, Руководство CLI

Страница: 204 / 332

204 Command reference
set config security
Description Configures the security database for the automatic saving of changes to the active security set and
fabric binding. The changes you make with this command are not retained when you reset or
power-cycle the switch unless you save them using the
config save
command.
Authority Admin session and a Config Edit session
Syntax
set config security
This command initiates an editing session in which to change the security database configuration.
The system displays each parameter one line at a time and prompts you for a value. For each
parameter, enter a new value or press Enter to accept the current value shown in brackets. Enter
q
or
Q
to end the editing session. Table 35 describes the security configuration parameters.
Table 35 Security configuration parameters
Parameter Description
AutoSave
Enables (
True
) or disables (
False
) the saving of changes to
active security set in the switch’s permanent memory. The default is
True
.
FabricBindingEnabled
Enables (
True
) or disables (
False
) the configuration and
enforcement of fabric binding on all switches in the fabric. Fabric
binding associates switch worldwide names with a domain ID in
the creation of ISL groups. The default is
False
.
Examples The following is an example of the
set config security
command:
8/20q FC Switch #> admin start
8/20q FC Switch (admin) #> config edit
8/20q FC Switch (admin-config) #> set config security
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
FabricBindingEnabled (True / False) [False]
AutoSave (True / False) [True ]
Finished configuring attributes.
This configuration must be saved (see config save command) and
activated (see config activate command) before it can take effect.
To discard this configuration use the config cancel command.
See also config , page 142
show config security , page 242