HP 8/20q, Руководство CLI

Страница: 82 / 332

82 Zoning configuration
Resetting the zoning database
There are two ways to remove all aliases, zones, and zone sets from the zoning database:
• Enter the
reset zoning
command, as shown in the following example. This is the preferred method.
8/20q FC Switch #> admin start
8/20q FC Switch (admin) #> reset zoning
The zoning configuration parameters,
MergeAutoSave
,
DefaultZone
, and
DiscardInactive
remain unchanged.
• Enter the
zoning clear
command, as shown in the following example:
8/20q FC Switch #> admin start
8/20q FC Switch (admin) #> zoning edit
8/20q FC Switch (admin-zoning) #> zoning clear
8/20q FC Switch (admin-zoning) #> zoning save
Deleting inactive zone sets, zones, and aliases
To delete all objects from the zoning database except those in the active zone set, enter the
zoning delete orphans
command.
8/20q FC Switch #> admin start
8/20q FC Switch (admin) #> zoning delete orphans
This command will remove all zonesets, zones, and aliases
that are not currently active.
Please confirm (y/n): [n] y
8/20q FC Switch (admin) #> zoning save
Managing zone sets
Managing zone sets consists of the following tasks:
• Creating a zone set , page 82
• Deleting a zone set , page 82
• Renaming a zone set , page 83
• Copying a zone set , page 83
• Adding zones to a zone set , page 83
• Removing zones from a zone set , page 83
• Activating a zone set , page 83
• Deactivating a zone set , page 83
All of these tasks except ” Activating a zone set ” on page 83 and ” Deactivating a zone set ” on page 83
require an Admin session and a Zoning Edit session.
Creating a zone set
To create a new zone set, enter the
zoneset create
command, as shown in the following example:
8/20q FC Switch #> admin start
8/20q FC Switch (admin) #> zoning edit
8/20q FC Switch (admin-zoning) #> zoneset create zoneset_1
8/20q FC Switch (admin-zoning) #>zoning save
Deleting a zone set
To delete a zone set, enter the
zoneset delete
command, as shown in the following example:
8/20q FC Switch #> admin start
8/20q FC Switch (admin) #> zoning edit
8/20q FC Switch (admin-zoning) #> zoneset delete zoneset_1
8/20q FC Switch (admin-zoning) #>zoning save