HP 70310A, Руководство по установке и проверке

Страница: 36 / 66

HP 70310A Option 002
The HP 70310A Option 002 module does not have an internal oven/oscillator . The other module
features are the same as the standard HP 70310A module .
HP 71210A System Connections
F ollow the steps below to use an HP 70310A Option 002 module in an HP 71210A system:
1. Connect the HP 70310A module's 100 MHz output to the HP 70900A module's 100 MHz IN
connector .
2. Connect an appropriate external frequency reference to the HP 70310A module's EXT REF
connector . (Refer to Chapter 3 for external frequency-reference requirements .)
Note
If the 6014 PLL error or 6016 No Freq Reference error codes are displayed
at instrument power-up , make sure that an appropriate external frequency
reference is connected to any HP 70310A Option 002 modules in the system.
Other Congurations
The HP 70310A Option 002 module has the following connections available:
The module's 100 MHz output supplies a stable frequency-reference signal for use by
HP 70000 Modular Measurement Systems and other instruments .
The module's 10 MHz output can be used to provide a stable 10 MHz reference frequency to
another instrument.
An external frequency reference must be connected to the HP 70310A Option 002 module's
rear-panel EXT REF connector .
Note
HP 70310A Option 002 modules do not have an external power pack
connected.
2-10 Installation