HP 64780A, Руководство пользователя

Страница: 452 / 546

Stack pointer is odd (Error 80)
Cause: You tried to modify the stack pointer to an odd value and the emulator
expects the stack to be aligned on a word boundary.
Action: Modify the stack pointer to an even value.
Step display failed (Error 688)
Cause: System failure or target condition.
Action: Check memory mapping and configuration questions.
Stepping aborted (Error 685)
Cause: This message is displayed if a break was received during a step command
with a stepcount of zero (0). The break could have been due to any of the break
conditions or a <CTRL> c break.
Stepping aborted; number steps completed: <steps completed> (Error 686)
Cause: This message is displayed if a break was received during a step command
with a stepcount greater than zero. The break could have been due to any of the
break conditions or a <CTRL> c break. The number of steps completed is
displayed.
Stepping failed (Error 680)
Cause: Stepping has failed for some reason. For example, this message will appear
if the emulator can’t modify the trace vector, which is used to implement the step
function. Usually, this error message will occur with other error messages.
Action: Refer to the descriptions of the accompanying error messages to find out
more about why stepping failed.
Symbol cannot contain text after the wildcard (Error 879)
Cause: You tried to include text after the wildcard specified in the symbol name
(for example, symbol*text).
Action: Enter the symbol again, but do not include text after the wildcard (*).
Chapter 12: Emulator Error Messages
Stack pointer is odd (Error 80)
432