191
Step Command
Remarks
9.
Advertise a default VPN route
to a peer or peer group.
peer
{
group-name
|
ip-address
[
mask-length
] }
default-route-advertise
vpn-instance
vpn-instance-name
By default, no default VPN route is
advertised to a peer or peer group.
10.
Apply an ACL to filter routes
received from or advertised to
a peer or peer group.
peer
{
group-name
|
ip-address
[
mask-length
] }
filter-policy
acl-number
{
export
|
import
}
By default, no ACL-based filtering
is configured.
11.
Save all route updates from a
peer or peer group.
peer
{
group-name
|
ip-address
[
mask-length
] }
keep-all-routes
By default, BGP does not save
route updates from any peer.
12.
Specify the router as the next
hop of routes sent to a peer or
peer group.
peer
{
group-name
|
ip-address
[
mask-length
] }
next-hop-local
By default, the router sets itself as
the next hop for routes sent to a
peer or peer group.
13.
Configure BGP to not change
the next hop of routes sent to
an EBGP peer or peer group.
peer
{
group-name
|
ip-address
[
mask-length
] }
next-hop-invariable
By default, the router sets itself as
the next hop for routes sent to an
EBGP peer or peer group.
In an inter-AS option C network
where an RR is used to advertise
VPNv4 routes, configure this
command on the RR so the RR does
not change the next hop of routes
sent to EBGP peers and clients.
14.
Set a preferred value for
routes received from a peer or
peer group.
peer
{
group-name
|
ip-address
[
mask-length
] }
preferred-value
value
By default, the preferred value is 0.
15.
Apply a prefix list to filter
routes received from or
advertised to a peer or peer
group.
peer
{
group-name
|
ip-address
[
mask-length
] }
prefix-list
prefix-list-name
{
export
|
import
}
By default, no prefix list based
filtering is configured.
16.
Configure BGP updates
advertised to an EBGP peer or
peer group to carry only
public AS numbers.
peer
{
group-name
|
ip-address
[
mask-length
] }
public-as-only
By default, BGP route updates
advertised to an EBGP peer or peer
group can carry both public and
private AS numbers.
17.
Configure the router as a route
reflector and specify a peer or
peer group as its client.
peer
{
group-name
|
ip-address
[
mask-length
] }
reflect-client
By default, no RR is configured.
18.
Set the maximum number of
routes BGP can receive from a
peer or peer group.
peer
{
group-name
|
ip-address
[
mask-length
] }
route-limit
prefix-number
[ {
alert-only
|
discard
|
reconnect
reconnect-time
} |
percentage-value
] *
By default, the number of routes
that BGP can receive from a peer
or peer group is not limited.
19.
Apply a routing policy to a
peer or peer group.
peer
{
group-name
|
ip-address
[
mask-length
] }
route-policy
route-policy-name
{
export
|
import
}
By default, no routing policy is
applied to a peer or peer group.
20.
Enable route target-based
filtering of received VPNv4
routes.
policy vpn-target
By default, this feature is enabled.
