196
Step Command
Remarks
15.
Configure the ASBR in
another AS as an EBGP peer.
peer
{
group-name
|
ip-address
[
mask-length
] }
as-number
as-number
By default, no BGP peer is created.
16.
Create the BGP IPv4 unicast
address family and enter its
view.
address-family ipv4
[
unicast
]
By default, the BGP IPv4 unicast
address family is not created.
17.
Enable exchange of IPv4
unicast routes with the PE in
the same AS and the ASBR in
another AS.
peer
{
group-name
|
ip-address
[
mask-length
] }
enable
By default, BGP does not exchange
IPv4 unicast routes with any peer.
18.
Enable exchange of labeled
IPv4 routes with the PE in the
same AS and the ASBR in
another AS.
peer
{
group-name
|
ip-address
[
mask-length
] }
label-route-capability
By default, BGP cannot advertise
labeled routes to any IPv4 peer or
peer group.
19.
Configure the ASBR-PE to set
itself as the next hop of routes
advertised to the PE in the
local AS.
peer
{
group-name
|
ip-address
[
mask-length
] }
next-hop-local
By default, BGP does not use its
address as the next hop of routes
advertised to an IBGP peer or peer
group.
20.
(Optional.) Apply a routing
policy to routes incoming from
or outgoing to a peer or peer
group.
peer
{
group-name
|
ip-address
[
mask-length
] }
route-policy
route-policy-name
{
export
|
import
}
By default, no routing policy is
applied.
Configuring a routing policy on an ASBR-PE
A routing policy on an ASBR-PE does the following:
•
Assigns MPLS labels to routes received from the PEs in the local AS before advertising them to the
peer ASBR-PE.
•
Assigns new MPLS labels to labeled IPv4 routes advertised to PEs in the local AS.
Which IPv4 routes are assigned with MPLS labels depends on the routing policy. Only routes that meet
the criteria are assigned with labels. All other routes are still common IPv4 routes.
To configure a routing policy for inter-AS option C on an ASBR-PE:
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Create a routing policy and
enter routing policy view.
route-policy
route-policy-name
{
deny
|
permit
}
node
node-number
By default, no routing policy is
created.
3.
Match IPv4 routes carrying
labels.
if-match mpls-label
By default, no match criterion is
configured.
4.
Set labels for IPv4 routes.
apply mpls-label
By default, no apply clause is
configured.
