manualshive.com logo in svg

HP 445860-B21 - 10Gb Ethernet BL-c Switch, Справочное руководство

HP 445860-B21 - 10Gb Ethernet BL-c Switch. Идеальное решение для быстрого соединения в дата-центрах. Скачайте бесплатный Руководство по эксплуатации с нашего сайта. Гарантировано ведущее качество и производительность. Посетите manualshive.com, чтобы скачать руководство.

Поделиться
Скачать
background image

 

 

 

Viewing statistics

 

 

 

  

 

89

 

Table 52 

 IF statistics 

 

Statistics Description 

ifInErrors 

For packet-oriented interfaces, the number of inbound packets that contained errors 

preventing them from being delivered to a higher-layer protocol.  
For character-oriented or fixed-length interfaces, the number of inbound transmission units 
that contained errors preventing them from being deliverable to a higher-layer protocol. 

ifInDiscards 

The number of inbound packets that were chosen to be discarded even though no errors 
were detected to prevent their being delivered to a higher-layer protocol. One possible 

reason for discarding such a packet could be to free up buffer space. 

ifInUnknownProtos 

For packet-oriented interfaces, the number of packets received via the interfaces that were 
discarded because of an unknown or unsupported protocol.  
For character-oriented or fixed-length interfaces which support protocol multiplexing the 
number of transmission units received via the interface which were discarded because of an 

unknown or unsupported protocol.  
For any interface that does not support protocol multiplexing, this counter will always be 
zero (0). 

ifOutErrors 

For packet-oriented interfaces, the number of outbound packets that could not be transmitted 
because of errors.  
For character-oriented or fixed-length interfaces, the number of outbound transmission units 
that could not be transmitted because of errors. 

ifOutDiscards 

The number of outbound packets, which were chosen to be discarded even though no errors 

had been detected to prevent their being transmitted. One possible reason for discarding 

such a packet could be to free up buffer space. 

 

IP statistics are described in the following table: 

Table 53 

 IP Statistics 

 

Statistic Description 

ipInReceives 

The total number of input datagrams received from interfaces, including those received in error.

ipInDiscards 

The number of input IP datagrams for which no problems were encountered to prevent their 
continued processing, but which were discarded (for example, for lack of buffer space). Note 

that this counter does not include any datagrams discarded while awaiting re-assembly. 

ipInDelivers 

The total number of input datagrams successfully delivered to IP user protocols (including 
ICMP). 

ipDefaultTTL 

The default value inserted into the Time-To-Live (TTL) field of the IP header of datagrams 

originated at this entity (the switch), whenever a TTL value is not supplied by the transport layer 
protocol. 

ipInUnknownProtos  The number of locally addressed datagrams received successfully but discarded because of an 

unknown or unsupported protocol. 

ipOutRequests 

The total number of IP datagrams which local IP user protocols (including ICMP) supplied to IP 
in requests for transmission. Note that this counter does not include any datagrams counted in 

ipForwDatagrams. 

Содержание 445860-B21 - 10Gb Ethernet BL-c Switch







































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 445860-B21 - 10Gb Ethernet BL-c Switch

Rockwell Automation Allen-Bradley CrossBoard 141C-G Series Installation Instructions preview
Allen-Bradley CrossBoard 141C-G Series
Бренд: Rockwell Automation Страницы: 4
Rockwell Automation Allen-Bradley FLEX 1794-AENT Installation Instructions Manual preview
Allen-Bradley FLEX 1794-AENT
Бренд: Rockwell Automation Страницы: 12
Oehlbach BTX 1000 User Manual preview
BTX 1000
Бренд: Oehlbach Страницы: 84
Diamond Multimedia Diamond BVU160 Specification Sheet preview
Diamond BVU160
Бренд: Diamond Multimedia Страницы: 1
Transcend JetFlash 220 User Manual preview
JetFlash 220
Бренд: Transcend Страницы: 23
Targus ACA958USZ User Manual preview
ACA958USZ
Бренд: Targus Страницы: 8
Alvarion WCPEn-2400-U Datasheet preview
WCPEn-2400-U
Бренд: Alvarion Страницы: 2
HandyWave HandyPort HPU-120 User Manual preview
HandyPort HPU-120
Бренд: HandyWave Страницы: 19
IT Works CPL500W User Manual preview
CPL500W
Бренд: IT Works Страницы: 105
Natec RIBERA User Manual preview
RIBERA
Бренд: Natec Страницы: 34
HP Z Series User Manual preview
Z Series
Бренд: HP Страницы: 40
HP Workstation Z600 Brochure preview
Workstation Z600
Бренд: HP Страницы: 2
HP StorageWorks FCA2214DC Implementation Manual preview
StorageWorks FCA2214DC
Бренд: HP Страницы: 9
HP SC44Ge Quickspecs preview
SC44Ge
Бренд: HP Страницы: 17
HP Workstation Z800 Specification preview
Workstation Z800
Бренд: HP Страницы: 73
HP Tc2110 - Server - 128 MB RAM Installation Manual preview
Tc2110 - Server - 128 MB RAM
Бренд: HP Страницы: 65
HP Workstation Z600 Specification preview
Workstation Z600
Бренд: HP Страницы: 75
HP Workstation Z600 Maintenance And Service Manual preview
Workstation Z600
Бренд: HP Страницы: 234

Бренды по названию

Популярные бренды

Загрузить еще бренды