Removal and replacement procedures 110
3.
Using two 18-mm wrenches, tighten the cap nut over the water temperature sensor.
4.
Route the water temperature sensor cable through to the front of the MCS unit.
5.
Connect the water temperature sensor cable connector to the water group controller connector
labeled either X12 or X13.
6.
Replace the AC transfer switch ("
Replacing the AC transfer switch
" on page
28
).
7.
Replace the condensation pump and sensors ("
Replacing the condensation pump and sensors
" on
page
49
).
8.
Replace the air deflector plate ("
Replacing the air deflector plate
" on page
34
).
9.
Replace the air sealing plate ("
Replacing the air sealing plate
" on page
36
).
10.
Relocate the power inlet box back into position ("
Relocating the power inlet box back into position
"
on page
95
).
11.
Replace the bottom fan unit ("
Replacing the bottom fan unit
" on page
45
).
12.
Restore water flow to the MCS unit ("
Restoring water flow
" on page
112
).
13.
Complete the operation checklist (on page
111
).
Содержание 403349-003
Страница 13: ...Customer self repair 13 ...
Страница 14: ...Customer self repair 14 ...
Страница 15: ...Customer self repair 15 ...
Страница 16: ...Customer self repair 16 ...
