HP 345646-001 - StorageWorks NAS 2000s External Storage Server Скачать руководство пользователя страница 62 | Manualshive

Страница: 62 / 200

background image

Disk Management

62

NAS 2000s Administration Guide

■

The controller named Smart Array 6400 Controller (if present) is used for all
externally SCSI attached storage.

Caution:

On the Smart Array 5i controller there are two logical drives pre-configured

under Array A. These two logical drives are configured for the NAS operating system and

should not be altered.

5. After the controller is selected there are three ways to configure the storage:

■

Express Configuration

Select Express Configuration to be asked a few simple questions and allow the
controller to be configured automatically. The Express Configuration is the easiest
and fastest way to configure a controller and will provide the most reasonable
configuration possible.

■

Configuration Wizards

Select Configuration Wizards to configure a controller through a series of wizards,
which provides a guide through the configuration process. Choosing Configuration
Wizards is not the fastest or easiest way to configure a controller, but it does offer
more control over the configuration and provides for a more individualistic setup.

■

Standard Configuration (default)

Select Standard Configuration to quickly configure a controller. Choosing
Standard Configuration is the fastest way to configure a controller but requires an
intermediate to advanced level of knowledge concerning storage. The Standard
Configuration path offers the least amount of help or step-by-step guides and does not
provide a FAQ panel, assuming the user knows exactly what they would like to
accomplish and are very familiar with the concepts required to complete the task.

The default method is the standard configuration method. The steps that follow are for
creating an array using the standard configuration mode.

6. Click Create Array.

7. Select all of the drives to be included in the array and click OK.

8. Select the array that was just created and click on Create logical Drive at the right.

9. Select the desired Fault Tolerance, Stripe Size, and Size of the logical disk, and click OK.

The Fault tolerance level depends on the amount of disks selected when the array was
created. A minimum of two disks is required for a RAID 0+1 configuration, three disks for
a RAID 5 configuration, and four disks for a RAID 5 ADG configuration.

10. After all logical disks have been created, click Save.

11. Click Exit ACU to exit the ACU session.

«
...
60
61
62
63
64
...
»

Содержание 345646-001 - StorageWorks NAS 2000s External Storage Server









































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 345646-001 - StorageWorks NAS 2000s External Storage Server

Бренд: CallDirect Страницы: 33

Бренд: Kaleidescape Страницы: 24

Garage Gator GGR125

Бренд: V-Bro Products Страницы: 17

NetVista N2800e

Бренд: IBM Страницы: 82

AT-9424Ts/XP AC

Бренд: Allied Telesis Страницы: 3

Бренд: Edgewater Networks Страницы: 7

UltraNEXUS-HD X5

Бренд: Leightronix Страницы: 5

Бренд: Gateway Страницы: 64

Бренд: ZyXEL Communications Страницы: 30

Бренд: Sollae Systems Страницы: 45

ProLiant DL580 Gen10

Бренд: HPE Страницы: 158

SUPERSERVER 6015C-M3

Бренд: Supero Страницы: 118

Бренд: Sollae Systems Страницы: 27

Бренд: H3C Страницы: 103

EDIMAX FAST ETHERNET MFP SERVER VERSION: 2.0

Бренд: Edimax Страницы: 118

Бренд: Seagate Страницы: 27

Бренд: Linksys Страницы: 2

Бренд: Cayman Systems Страницы: 170

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды