HP 345646-001 - StorageWorks NAS 2000s External Storage Server Скачать руководство пользователя страница 14

Страница: 14 / 200

About this Guide

NAS 2000s Administration Guide

Power supplies or systems marked with these symbols indicate the presence of

multiple sources of power.

WARNING:

To reduce the risk of personal injury from electrical shock, remove

all power cords to completely disconnect power from the power supplies and

systems.

Any product or assembly marked with these symbols indicates that the component

exceeds the recommended weight for one individual to handle safely.

WARNING:

To reduce the risk of personal injury or damage to the equipment,

observe local occupational health and safety requirements and guidelines for

manually handling material.

Rack Stability

Rack stability protects personnel and equipment.

WARNING:

To reduce the risk of personal injury or damage to the equipment, be sure that:

■

The leveling jacks are extended to the floor.

■

The full weight of the rack rests on the leveling jacks.

■

In single rack installations, the stabilizing feet are attached to the rack.

■

In multiple rack installations, the racks are coupled.

■

Only one rack component is extended at any time. A rack may become unstable if more

than one rack component is extended for any reason.

Содержание 345646-001 - StorageWorks NAS 2000s External Storage Server









































































































































































































Результаты поиска

Содержание 345646-001 - StorageWorks NAS 2000s External Storage Server

Отзывы:

Похожие инструкции для 345646-001 - StorageWorks NAS 2000s External Storage Server

Бренды по названию

Популярные бренды

HP 345646-001 - StorageWorks NAS 2000s External Storage Server, Руководство администратора

Результаты поиска

Содержание 345646-001 - StorageWorks NAS 2000s External Storage Server

Отзывы:

Похожие инструкции для 345646-001 - StorageWorks NAS 2000s External Storage Server

Бренды по названию

Популярные бренды