HP 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard Drive Скачать руководство пользователя страница 99

Страница: 99 / 123

HP StorageWorks 1000 Modular Smart Array installation guide

A Regulatory notices

Regulatory Compliance identification numbers

For the purpose of regulatory compliance certifications and identification, your device is assigned

an HP Series number. The Series number can be found on the product label, along with the required

approval markings and information. The product label is located on the right side of the chassis.

When requesting certification information for this product, always refer to this Series number. This

Series number should not be confused with the marketing name or model number for your storage

system.

Federal Communications Commission notice

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used

in accordance with the instructions, may cause harmful interference to radio communications.

Operation of this equipment in a residential area may cause harmful interference, in which case the

user must correct the interference at personal expense.

Modifications

The FCC requires the user to be notified that any changes or modifications made to this device that

are not expressly approved by Hewlett-Packard Company may void the user's authority to operate

the equipment.

Cables

Connections to this device must be made with shielded cables with metallic RFI/EMI connector

hoods in order to comply with FCC Rules and Regulations.

Canadian notice (Avis Canadien)

This Class A digital apparatus meets all requirements of the Canadian Interference-Causing

Equipment Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel

brouilleur du Canada.

Содержание 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard Drive




























































































































Результаты поиска

Содержание 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard Drive

Отзывы:

Похожие инструкции для 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard Drive

Бренды по названию

Популярные бренды

HP 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard Drive, Руководство по установке

Результаты поиска

Содержание 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard Drive

Отзывы:

Похожие инструкции для 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard Drive

Бренды по названию

Популярные бренды