HP 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard Drive Скачать руководство пользователя страница 20

Страница: 20 / 123

Installation procedures—All deployments

QLogic Driver for HBA Control and

Multipathing

http://h18006.www1.hp.com/

products/sanworks/

multipathoptions/index.html

Multipathing tool for Linux

(active/passive and active/active environments)

Used in multipathing environments running either active/passive or

active/active firmware, QLogic Driver for HBA Control and Multipathing

provides multipathing support for Linux environments.
This multipathing tool is included with the QLogic HBA driver on the MSA

Support Software CD.

Emulex MultiPulse Path Failover for

Linux

http://h18006.www1.hp.com/products/

sanworks/softwaredrivers/multipathoptions

/linux.html

Multipathing tool for Linux

(active/active environments only)

Used in multipathing environments running active/active firmware, Emulex

MultiPulse provides multipathing support for Linux environments.
MultiPulse is included with the Emulex Linux HBA driver on the MSA

Support Software CD.

NOTE:

Emulex MultiPulse is supported for use with Linux kernel

2.6 or later only. No support is provided or planned for earlier

Linux kernels.

Array Configuration Utility (ACU)
Array Configuration Utility - Command

Line Interface (ACU-CLI)

h18000.www1.hp.com/products/

servers/proliantstorage/

software-management/acumatrix/

index.html

Storage configuration software

(active/passive and active/active

environments

)

The Array Configuration Utility (ACU) is a server-based, browser-accessed

tool used to configure an array controller and its storage. The ACU can be

used in Windows, Linux, and NetWare environments. (NetWare

environments run the ACU directly from the MSA Support Software CD.)
The Array Configuration Utility-Command Line Interface (ACU-CLI) is a

command line interface used to configure an array controller and its

storage. The ACU-CLI is primarily used in HP-UX environments.
These utilities are provided on the MSA Support Software CD.

Table 3

MSA1000 and SAN-related websites (continued)

Website Content

Содержание 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard Drive




























































































































Результаты поиска

Содержание 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard Drive

Отзывы:

Похожие инструкции для 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard Drive

Бренды по названию

Популярные бренды

HP 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard Drive, Руководство по установке

Результаты поиска

Содержание 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard Drive

Отзывы:

Похожие инструкции для 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard Drive

Бренды по названию

Популярные бренды