HP 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard Drive Скачать руководство пользователя страница 61

Страница: 61 / 123

HP StorageWorks 1000 Modular Smart Array installation guide

The Support Software CD main menu is displayed.

On the CD Main Menu, do the following:

Click

View Contents

to review notes and information that supplement this document.

CAUTION:

Use only the MSA Support Software CD to install HBA drivers. Drivers for all

supported HBAs are included on the CD and are the only versions approved for use with the

MSA.

Install the following component

(required)

• HBA driver (and the included Windows Event Notification Service)

IMPORTANT:

After installing the HBA and Event Notification Service drivers, remove the

Support Software CD from the CD-ROM drive and restart the server. Then, re-insert the MSA

Support Software CD and access the CD main menu.

Install the following optional components

(recommended)

• Array Configuration Utility (ACU)
• Array Configuration Utility-Command Line Interface (ACU-CLI)
• Array Diagnostic Utility (ADU)

Содержание 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard Drive




























































































































Результаты поиска

Содержание 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard Drive

Отзывы:

Похожие инструкции для 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard Drive

Бренды по названию

Популярные бренды

HP 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard Drive, Руководство по установке

Результаты поиска

Содержание 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard Drive

Отзывы:

Похожие инструкции для 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard Drive

Бренды по названию

Популярные бренды