manualshive.com logo in svg

HP 15-ew0 Series, Руководство по техническому обслуживанию и ремонту, Страница: 63 / 100

Поделиться
Скачать
HP 15-ew0 Series Скачать руководство пользователя страница 63

4.

Remove the solid-state drive (see 

Solid-state drive on page 37

).

5.

Remove the fan (see 

System fan on page 43

).

6.

Remove the heat sink (see 

Heat sink on page 54

).

When you replace the system board, be sure to remove the following components from the defective system 

board and install them on the replacement system board:

●

Memory modules (see 

Memory modules on page 39

).

●

WLAN module (see 

WLAN module on page 41

).

●

Infrared cable (see 

Infrared cable on page 43

).

Remove the system board:

1.

Release the ZIF connector (1) to which the webcam/microphone module cable is connected, and then 

disconnect the webcam/microphone module cable from the system board.

2.

Release the ZIF connector (2) to which the display panel cable is connected, and then disconnect the display 

panel cable from the system board.

3.

Disconnect the speaker cable (3) from the system board.

4.

Remove the WLAN module shield (4).

The WLAN module shield is available using spare part number N10779-001.

5.

Carefully disconnect the WLAN module antenna cables (5) from the WLAN module.

NOTE:

Computer models have either one or two WLAN module antenna cables. On models with two 

antenna cables, the #1 white WLAN module antenna cable connects to the WLAN module #1 Main terminal. 

The #2 black WLAN module antenna cable connects to the WLAN module #1 Aux terminal.

6.

Release the ZIF connector (6) to which the backlight cable is connected, and then disconnect the backlight 

cable from the system board.

7.

Release the ZIF connector (7) to which the keyboard cable is connected, and then disconnect the keyboard 

cable from the system board.

System board

57

Содержание 15-ew0 Series





































































































Отзывы:

Нет отзывов