manualshive.com logo in svg

HP 15-ew0 Series, Руководство по техническому обслуживанию и ремонту, Страница: 51 / 100

Поделиться
Скачать
HP 15-ew0 Series Скачать руководство пользователя страница 51

IMPORTANT:

After replacing the display panel assembly, it is necessary to update the Touch Panel Firmware. 

The Touch Panel Firmware update is available on the HP website under HP Customer Support – Software and 

Driver Downloads.

Before removing the display assembly, follow these steps:

1.

Prepare the computer for disassembly (see 

Preparation for disassembly on page 34

).

2.

Remove the bottom cover (see 

Bottom cover on page 34

).

3.

Disconnect the battery cable from the system board (see 

Battery on page 36

).

Remove the display assembly:

1.

Release the ZIF connector (1) to which the webcam/microphone module cable is connected, and then 

disconnect the webcam/microphone module cable from the system board.

2.

Remove the WLAN module shield (2).

The WLAN module shield is available using spare part number .

3.

Carefully disconnect the WLAN module antenna cables (3) from the WLAN module.

NOTE:

Computer models have either one or two WLAN module antenna cables. On models with two 

antenna cables, the #1 white WLAN module antenna cable connects to the WLAN module #1 Main terminal. 

The #2 black WLAN module antenna cable connects to the WLAN module #1 Aux terminal.

4.

Release the WLAN module antenna cables from the retention clips (4) that are built into the fan.

5.

Release the ZIF connector (5) to which the display panel cable is connected, and then disconnect the display 

panel cable from the system board.

6.

Release the display panel cable from the retention clip (6) that is built into the computer.

Display assembly

45

Содержание 15-ew0 Series





































































































Отзывы:

Нет отзывов