manualshive.com logo in svg

HP 15-ew0 Series, Руководство по техническому обслуживанию и ремонту, Страница: 66 / 100

Поделиться
Скачать
HP 15-ew0 Series Скачать руководство пользователя страница 66

3.

Remove the speakers (3) from the computer.

When removing the speakers, make note of the location of the two rubber isolator locations (4). The 

absence of or damage to these isolators can result in degraded speaker performance.

Reverse this procedure to install the speakers.

Touchpad cable

To remove the touchpad cable, use this procedure and illustration.

Table 5-11

Touchpad cable description and part number

Description

Spare part number

Touchpad cable (includes double-sided adhesive)

N09640-001

Before removing the touchpad cable, follow these steps:

1.

Prepare the computer for disassembly (see 

Preparation for disassembly on page 34

).

2.

Remove the bottom cover (see 

Bottom cover on page 34

).

3.

Remove the battery (see 

Battery on page 36

).

Remove the touchpad cable:

1.

Release the ZIF connector (1) to which the touchpad cable is connected, and then disconnect the touchpad 

cable from the system board.

2.

Release the ZIF connector (2) to which the touchpad cable is connected, and then disconnect the touchpad 

cable from the touchpad.

60

Chapter 5  Removal and replacement procedures for authorized service provider parts

Содержание 15-ew0 Series





































































































Отзывы:

Нет отзывов