manualshive.com logo in svg

HP 15-ew0 Series, Руководство по техническому обслуживанию и ремонту, Страница: 65 / 100

Поделиться
Скачать
HP 15-ew0 Series Скачать руководство пользователя страница 65

15.

Slide the system board (5) up and to the left at an angle to remove it.

When removing the system board, be sure to take note of the location of the I/O bracket (6). This bracket 

may become dislodged when the system board is removed.

Reverse this procedure to install the system board.

Speakers

To remove the speakers, use this procedure and illustration.

Table 5-10

Speakers description and part number

Description

Spare part number

Speakers (include cables, left and right speakers, and 2 rubber isolators)

N09638-001

Before removing the speakers, follow these steps:

1.

Prepare the computer for disassembly (see 

Preparation for disassembly on page 34

).

2.

Remove the bottom cover (see 

Bottom cover on page 34

).

3.

Remove the battery (see 

Battery on page 36

).

Remove the speakers:

1.

Detach the speaker cable (1) from the touchpad bracket.

2.

Remove the four Phillips M2.0 × 2.4 broad head screws (2) that secure the speakers to the computer.

Speakers

59

Содержание 15-ew0 Series





































































































Отзывы:

Нет отзывов