manualshive.com logo in svg

HP 15-ew0 Series, Руководство по техническому обслуживанию и ремонту, Страница: 49 / 100

Поделиться
Скачать
HP 15-ew0 Series Скачать руководство пользователя страница 49

Infrared cable

To remove the infrared cable, use this procedure and illustration.

Table 5-6

Infrared cable description and part number

Description

Spare part number

Infrared cable

N09639-001

Before removing the infrared cable, follow these steps:

1.

Prepare the computer for disassembly (see 

Preparation for disassembly on page 34

).

2.

Remove the bottom cover (see 

Bottom cover on page 34

).

3.

Disconnect the battery cable from the system board (see 

Battery on page 36

).

Remove the infrared cable:

1.

Release the zero insertion force (ZIF) connector (1) to which the infrared cable is connected, and then 

disconnect the cable from the system board.

2.

Release the ZIF connector (2) to which the infrared cable is connected, and then disconnect the cable from 

the system board.

3.

Remove the infrared cable from the computer (3).

Reverse this procedure to install the infrared cable.

System fan

To remove the system fan, use this procedure and illustration.

Infrared cable

43

Содержание 15-ew0 Series





































































































Отзывы:

Нет отзывов