Hoval BioLyt 13, Руководство по эксплуатации

Страница: 14 / 88

14 4 214 153 / 00
HEATING SYSTEM CONTROL
5. Heating system control
5.1 Function of the TopTronic
®
E control
The TopTronic
®
E control module is used for controlling
your heating system. Using the touch-sensitive screen
(referred to below as touchscreen), you can make vari-
ous settings on your system at the touch of a fingertip or
using the stylus.
NOTICE
The surface of the TopTronic
®
E control mod-
ule is not allowed to be touched with sharp
or pointed objects for operation – risk of
scratching.
The control module has the following functions:
• Maintaining the desired room temperature independent
of the outside temperature
• Heating the living space only when required
• Producing hot water only when required
• Displaying information about the system
Further functions:
• Making it possible to set the desired temperatures and
select a basic program (chapter 5.8 page 31)
• Turning the heat generator ON/OFF
• Monitoring temperatures
All the basic settings will have already been carried out by
Hoval, or the heating engineer, during commissioning of
the heating system. You can make further settings if you
go on a journey or if your home is too cold or too warm.
You can find an overview of the most frequently asked
questions in chapter 5.3 page 16.
How to save energy!
For your benefit and for the environment
Using energy more efficiently by avoiding unnecessary
losses! With little effort, you can optimise the operation of
your heating system and save energy at the same time.
It is worth setting your personal day and week pro-
grams
You can save valuable energy and money by specifically
adjusting the heating times with a personal day or week
program to take account of the times when you will be
present and absent. The TopTronic
®
E control makes it
very simple to set different switching cycles for individual
daily sequences (chapter 5.9 page 34).
5.2 Operating and display elements
The graphical displays on the control module can be op-
erating or display elements.
If the TopTronic
®
E control module is in sleep
mode, it can be “woken up” by touching the
touchscreen. Sleep mode and the duration
until the mode starts can be adjusted (chapter
5.12.13 page 73, nos. 3 and 4).
Operating elements
Operating elements are under-
stood to be the buttons on the
control module that can be select-
ed by touching in order to adjust
various settings. The operating
elements are shown in white on a
black background or in black on a
white background. Values that can
be changed with plus ( ) or minus
( ) can be touched directly. As
a result, a keypad appears on the
control module which helps you to
make the entry.
Display elements
Display elements only provide in-
formation and cannot be selected.
They are shown in colour.