Hoval BioLyt 13, Руководство по эксплуатации

Страница: 30 / 88

30 4 214 153 / 00
HEATING SYSTEM CONTROL
5.7.7 Call up system information
1
Touch the Info ( ) button to select it.
Also use the Main menu ( ) > Info (page 2) to access the
overview of the system information (5.12.2 page 62, no. 2).
2
The Info menu item is displayed. Information for each system area can
be called up here. To do this, use the horizontal arrows ( ) to select the
corresponding areas. Use the Back ( ) button to exit the menu item.
The start screen appears again.
5.7.8 Joint operating mode for heating and hot water circuits
If your system has several heating circuits (e.g. apart-
ments), the TopTronic
®
E control module offers the “Joint
operation of all heating and domestic hot water circuits”
function. For the same operating mode to be set for all
heating and hot water circuits, it is necessary for the
“Joint operation of all heating and domestic hot water cir-
cuits” checkbox to be activated (5.7.3 page 26, no. 2).
The room temperature, the day program and the basic
program are thus changed at the same time in all circuits.
Programs are controlled as follows in joint operation:
Temperature
Synchronisation exclusively in the heating circuits
There is no synchronisation of the hot water temperature during
the joint operating mode.
Basic programs Synchronisation in the heating and hot water circuits
Day programs
Synchronisation exclusively in the heating circuits
“Special day programs”
(Party and Absent)
Synchronisation in the heating and hot water circuits