
TOUCH USER MANUAL 33
ROLL-IN SySTEM
ROLL-IN SYSTEM
The Roll-in system comes as standard on all 1.16, 1.20 & 2.20
models. The trolley can be removed completely from the oven
cabinet and replaced at will. This allows the oven to be preheated
whilst the trolley is being loaded.
Removing and replacing Roll-in trolley
Open the oven door by turning the handle 90° anti clockwise. the
door must be open minimum 100° to remove the trolley from the
oven.
Insert the removable trolley handle bar into the holes near the
base. Release the locks on the wheels and carefully pull the trolley
out of the oven cabinet.
Place the Preheat bridge into place at the bottom of the oven
cabinet before closing the oven door. The preheat bridge creates
a seal in the space the trolley has left open so no energy is lost
during preheat.
The removable handle for the trolley can also be used to remove
the preheat bridge after heating. The preheat bridge can be hung
on the side if the oven.
The trolley can be replaced in the same way as removed.
Note
: The Roll-in system oven must be installed on a level flat
floor.
To protect the gasket of the oven door please ensure that the
wheels are locked once the oven trolley is in place.