10 TOUCH USER MANUAL
USING THE SMARTTOUCH® DISPLAy
Setting the RackTimer
The RackTimer function enables you to set one or two timers for each individual rack.
This way you can cook different products on the same rack or on different racks in
the same cooking mode. RackTimer can be used in the following cooking modes:
Hot Air, CombiSmart, ClimaOptima, Cook & Regen and Steaming.
1.
In
each
mode, touch the
Timer
display, and then touch the
RackTimer
button.
2.
In the
Rack setup
list, drag you finger up or down to select the number of racks
you want to associate with the timer. you can choose between 1-10 racks.
3.
In the
Timers per rack
list drag you finger up or down to select one or two timers
per rack.
4.
Push the arrow button
in the upper right corner to continue.
5.
Touch the desired rack, drag you finger up and down the
min
and
sec
wheels.
Each rack is set to 05:00 as default. Each rack will remember the previously set
time
6.
A running timer will be blue.
7.
For the final minute of the timer it will turn yellow.
8.
An alarm will sound when the timer reaches 00:00 and will then flash green.
9.
If the timer is not stopped after one minute of the alarm sounding it will then
start to flash red.
10.
To cancel or reset a timer, touch the timer then touch finish or set a new time.
