33 of 33
Indesit
Company
Service Manual UK
English
W
Power Module
1.
Remove the back panel (B).
2.
Remove the screw or screws securing the module support to the cabinet.
3.
Disconnect the wiring - it may be necessary to remove one of the plugs to extract the module from
its location.
IMPORTANT - AVOIDING ELECTRICAL DAMAGE TO THE MODULE
Before disconnecting any plugs it is advisable to note their locations.
4.
Lift the module clear.
PROGRAMMING A NEW MODULE
When replacing a module with a new unprogrammed unit, it is essential to use the correct
Smartcard, or if using Memwriter software on a PC or EMIT unit, it is essential that the correct
Platform such as
EVO2
or
New Platform (Arcadia)
is selected.
Attempting to Program the module to the to the wrong platform can render it permanently
unprogrammable.
X
Cabinet
1.
Remove the table top (A).
2.
Remove the dispenser drawer (C) and console panel (D).
3.
Remove the rear access panel (B).
4.
Remove the motor (M).
5.
Remove the top balance weight (Nb).
6.
Remove the drum assembly (V).
7.
Remove the drain pump (T).
8.
Unscrew the feet, remove the wheels and remove hose clips from the rear of the cabinet.
