26 of 33
Service Manual UK
Indesit
Company
English
MAIN BOARD PROGRAMMING
The electronic board will always be supplied without a programme when supplied as a spare part.
NOTE: This board does not have a physically replaceable Eeprom.
Programming a Main Board
There are a number of ways the board can be programmed - some of which are not applicable to
certain markets.
Types of programming:
1.
Handheld Terminal (Not UK)
2.
Emit / Memwriter (UK Indesit Service Engineers)
3.
Smart Reader & Smart Card (certain area's of UK market) see photo.
IMPORTANT - Is it EVO2 or ARCADIA ?
When replacing a module with a new unprogrammed unit, it is essential to use the correct
Smartcard, or if using Memwriter software on a PC or EMIT unit, it is essential that the correct
Platform such as
EVO2
or
New Platform (Arcadia)
is selected.
Attempting to Program the module to the to the wrong platform can render it permanently
unprogrammable. If necessary, refer to the identification photographs in the manual as well as
using the correct model details from the rating plate -
BEFORE PROGRAMMING THE MODULE!
Smart Card Reader
Smart Card
this card hold the program file
and can only be used ONCE.
