29 of 40
Service Manual UK
Indesit
Company
English
SERVICING NOTES & DISMANTLING INSTRUCTIONS
SAFETY NOTES:-
1. ENSURE THAT THE MACHINE IS UNPLUGGED BEFORE DISMANTLING.
2. BEWARE OF SHARP EDGES ON METAL PANELS AND PRESSED PARTS.
Access to all components are via the side panels, front plinth or the access panel in the base tray.
A.
Side Panels
1.
Remove the 6 screws securing the side
panel. (3 front, 3 rear).
2.
Using a flat bladed screwdriver, ease the
panel over the location pegs and lift away.
B.
Front Access Flap
1.
Remove 2 securing screws.
2.
Release 2 locking clips.
3.
Carefully open flap releasing wiring harness
from top edge.
Note:
(The Control Module is attached to the
flap).
4.
When refitting be careful not to trap any wires.
Release access flap locking tabs
C.
Control Module
1.
Release front access flap as in B). and release harness retaining clip before hinging down.
2.
Slide power module towards connections to release from access panel.
3.
Note position and remove connections.
4.
Release board from carrier.
Ensure that the harness is
clipped back into place when
the flap is closed
Front Access panel opens out with Control Module Attached.
