Hotpoint Ariston OK 1037EL DP.20 X/HA Скачать руководство пользователя страница 27

Страница: 27 / 64

The first time you use your appliance, heat the

empty oven with its door closed at its maximum
temperature for at least half and hour. Make sure
that the room is well ventilated before switching the
oven off and opening the oven door. The appliance
may emit a slightly unpleasant odour caused by
protective substances used during the
manufacturing process burning away.

To make the setting process easier, press and

hold the

and

buttons to scroll through the

numbers on the display rapidly.

Each setting will automatically be stored in the

appliance memory after 10 seconds.

During operation, we recommend the removal of

any crockery or delicate foodstuffs from the cavities
not being used.

Once cooking has begun, before the DIVIDER is

removed, the oven must be switched off using the

button.

Every time the oven is switched on it is set to the

CREATION cooking mode.

The touch controls cannot be activated if the user

is wearing gloves.

Control panel/door lock

The door and control panel can be locked while the

oven is off, once cooking has started or finished and
during programming.

To lock the door and the oven controls, press and
hold the

button for at least 2 seconds. A buzzer

will sound and the TEMPERATURE display shows
the key symbol “O—n”. The

icon will light up to

indicate lock activation.
To deactivate the lock, press and hold the
button again for at least 2 seconds.

When cleaning the appliance, the door lock may be

closed accidentally (there is an exposed spring). If
this happens, reopen it by turning the door lock
upwards (see figure).

Start-up and use

Setting the clock

The clock can only be set when the oven is

switched off. If the oven is in standby mode,

pressing the

button once will display the current

time setting. Press it again to set the time.

After connection to the power supply network or after

a blackout, the

button and the digits on the

TIME display will flash for 10 seconds.
To set the clock:

1. Press button

2. Adjust the hour figure using the

and

buttons.

3. Once you have reached the correct hour value,

press the

button.

4. Repeat the above process to set the minutes.
If a blackout occurs, it will be necessary to reset the

clock. If the

icon flashes on the display, this

indicates that the clock has not been set correctly.

Setting the minute minder

The minute minder may be set regardless of

whether the oven is switched on or off. It does not
switch the oven on or off.

When the set time has elapsed, the minute minder
emits a buzzer that will automatically stop after 30
seconds or when any active button on the control
panel is pressed.
To adjust the minute minder, proceed as follows:

1. Press button

2. Set the desired time using buttons

and

3. Once you have reached the desired value, press

the

button again.

The lit

symbol will remind you that the minute

minder is on.

To cancel the minute minder, press the

button

and use the

and

–

buttons to set the time to

00:00. Press the

button again.

The

icon will switch off to indicate that the

minute minder has been disabled.

Cooling ventilation

In order to cool down the external temperature of the
oven, a cooling fan blows a stream of air between
the control panel and the oven door, as well as
towards the bottom of the oven door. At the
beginning of the FAST CLEAN mode, the cooling fan
operates at low speed.