manualshive.com logo in svg

Hoshizaki KM-900MAH, Руководство по обслуживанию

Поделиться
Скачать
Hoshizaki KM-900MAH Скачать руководство пользователя страница 68

68

IMPORTANT

Ensure all components, fasteners and thumbscrews are securely in place after any
maintenance or cleaning is done to the equipment.

1. PREPARING THE ICEMAKER FOR LONG STORAGE

WARNING

When shutting off the icemaker for an extended time, drain out all water from
the water tank and remove the ice from the Storage Bin.  The Storage Bin
should be cleaned and dried.  Drain the icemaker to prevent damage to the
water supply line at sub-freezing temperatures, using air or carbon dioxide.
Shut off the icemaker until the proper ambient temperature is resumed.

• When the icemaker is not used for two or three days, it is sufficient to only move the  Control

Switch to the “OFF” position, unless the icemaker will be at sub-freezing temperatures.

[1] On water-cooled model only, first remove the water from the water-cooled
     condenser:

1) Remove the Front Panel.

2) Move the Control Switch, on the Control Box, to the “OFF” position.

3) Wait 3 minutes.

4) Move the Control Switch to the “ICE” position.

5) Allow 5 minutes for the icemaker to fill with water and the Water Pump to start operating.

6) Close the Water-cooled Condenser Water Supply Line Shut-off Valve.

7) Open the Drain Valve for the water-cooled condenser water supply line.

8) Allow the line to drain by gravity.

9) Attach compressed air or carbon dioxide supply to the Condenser Water Line Drain

Valve.

10) Quickly blow the water-cooled condenser out using compressed air or carbon
       dioxide until water stops coming out.

VI.  MAINTENANCE AND CLEANING INSTRUCTIONS

Содержание KM-900MAH










































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды