66
10. DRAIN VALVE
1) Unplug the icemaker.
2) Close the water supply tap.
3) Remove the top panel, and unscrew the rear panel.
4) Remove the water valve (see “V.
9. WATER VALVE”).
5)
Disconnect the connectors (or tab terminals) of the drain valve lead.
6) Pinch and shift the two hose clamps.
7) Disconnect the hoses from the drain valve. Put a towel under the drain valve to
receive any water coming out and prevent it from splashing out.
8) Remove the mounting screw.
9) Install the new valve in the reverse order of the removal procedure.
10) Open the water supply tap.
11) Plug in the icemaker.
12) Check for leaks.
13) Refit the panels in their correct positions.
Hose Clamp
Mounting Screw
Hose Clamp
Water Supply Hose
Silicone Hose
