Hoshizaki IM-100, Руководство по обслуживанию

Страница: 59 / 129

55
Fig. 18
Cleaner
Container
Hose
Condenser
3. WATER-COOLED CONDENSER
Deposits inside the water circuit of the Water-cooled Condenser decrease cooling
performance. Clean inside of the Condenser by circulating a cleaning solution.
1) Prepare the following:
Cleaning solution [Read and follow any instructions on label or bottle.]
Pump
Container for solution Hose Hose bands
Two fittings [R1/2 - 3/8”DIA] Two fittings [3/8” flare - 3/8”DIA]
CAUTION
Do not use a cleaning solution that will corrode the copper tubing. In case of
contact with the solution, flush with water.
2) Remove the panels and check for leaks from the water line.
3) Unplug the icemaker or disconnect the power source, and close the water supply tap.
4) Disconnect the cooling water inlet and outlet pipings and attach fittings to connect hoses.
5) Disconnect the inlet and outlet tubings of the Water Regulator and replace the Water
Regulator by fittings.
6) Connect hoses as shown in Fig. 18 and secure them by hose bands.
7) Fill the container with the cleaning solution.
8) Run the pump motor and circulate the solution for a period recommended in the instructions
on label or bottle of the cleaner.
9) Rinse the water circuit.
10) Reverse the above procedure in steps 2) through 6).
11) Check the icemaking capacity referring to “VI. 3. PERFORMANCE DATA”.