manualshive.com logo in svg

Hoshizaki IM-100, Руководство по обслуживанию

Поделиться
Скачать
Hoshizaki IM-100 Скачать руководство пользователя страница 53

49

Fig. 13

[Normal Position]

[Drain Position]

Bracket

Tank Drain
Pipe

[b] IM-100, IM-130, IM-160, IM-240

1) Close the water supply tap, and remove the

Inlet Hose.

2) Remove the Front Panels (Upper and

Lower).

3) Remove the screw located on the front of

the Water Tank.

4) Move the Tank Drain Pipe to the drain

position.  See Fig. 13.

5) Push the Reset Switch in the Control Box, or

disconnect power source and reconnect
after 3 minutes.

6) The Water Pan will open, and then the

Actuator Toggle Switch will turn to the
“DEFROST” position in 40 seconds.  (Click
sound will be heard.)

7) Blow out the water supply line immediately

after the Water Pan has opened.

Note: This procedure is necessary to protect

the icemaker from freezing up at
subfreezing temperature.

8) Unplug the icemaker with the Actuator Toggle Switch in the “DEFROST” position.

9) Move the Tank Drain Pipe to the normal position, and secure it with the screw.

10) Remove all ice from the Storage Bin, and clean the Bin.

11) Replace the panels in their correct positions.

12)  Replace the Inlet Hose in its correct position.

Содержание IM-100


































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды