Ice Bank Beer System Manual
www.lancerbeverage.com
Page 9 of 17
Hoshizaki Lancer reserve the right to change specifications without notice.
Part No: 68000213
Images are for illustration purposes only as product may vary.
No 072-2 – 26 May 2020
carefully scrubbing or use of a descaler. Check agitator and condenser fan operate without
noise or obstructions.
Gas and beer Hoses
Check the gas and beer hoses for damage, deformation, and water leak marks (stains). If any
problem is found, contact 1300 551 361 Lancer - National Service Centre.
Yearly Cleaning
Clean the water bath tank
•
Disconnect the machine’s electrical plug from the mains outlet.
•
Thaw the ice bank formed in the water bath tank. Do not transport the machine with the
formed ice bank to avoid breaking the capillary tube on the refrigeration system.
•
Never use sharp or cutting objects to remove ice from the evaporator; use only warm
water so as not to damage the evaporator or the water bath tank; empty the water with a
suction pump or draining pipe.
•
Clean the stainless steel coils and the evaporator using a soft brush, rinse the tank and
coils with clean water.
•
Fill the tank with sufficient clean water to cover the evaporator.
•
Check that the overflow pipe and the piping are free from any obstructions.
5. Gas System
Safety with CO2:
IMPORTANT Gas Equipment should be serviced by Authorized Personnel
Only
CAUTION
•
Advise someone of your intention to enter an area where
CO2 is used.
•
Remember the symptoms of excessive CO2 intake.
•
CO2 in a confined space can kill.
•
Never degas in a confined area.
•
Practice team lifting when manoeuvring cylinders.
•
When connecting up new cylinders always check that the
seal is in place on the ezifit handle
•
Use safety chains on all cylinders.
•
Never tighten or adjust any equipment on the gas board
with the gas bottle/ bulk gas turned on.
CAUTION
Always employ safe working procedures when handling Gas
and Gas Equipment.
