16
F. Door Reversal
This appliance is provided with a cabinet design which, after being delivered to the
installation location, permits changing of the door swing from left to right or right to
left. For further details, contact your local Hoshizaki distributor or Hoshizaki Technical
Support at 1-800-233-1940.
G. Final Checklist
1) Have the legs, casters, or food cart ramp been properly installed and the appliance
leveled?
2) Is the appliance in a site where the ambient temperature is within 45°F to 100°F (7°C to
38°C) all year around?
3) Is there at least 4" (11 cm) clearance from side walls and 10" (25 cm) overhead
clearance for proper ventilation?
4) Have the shipping carton, tape, and packing material been removed from the
appliance? Has the protective plastic film been removed from both the exterior panels
and the interior door panel?
5) Have the appliance and accessories been checked for shipping damage?
6) Does the electrical connection meet all national, state, and local code and regulation
requirements? Has a proper ground been installed to the appliance? Has the power
supply voltage been checked or tested against the nameplate rating?
7) Corded Models:
Is the power supply a properly grounded, independent 3-prong wall
outlet?
8)
Hard-Wired Models: Have all electrical connections been made?
9) Has the optional overflow pan (if applicable) been properly installed?
10) RFH1-SSB(-HS)(-HSE): Have the float switch, suction hose bracket, and reservoir been
installed? Does the float switch move freely? Is the suction hose free of kinks?
11) Have the refrigerant lines been checked to make sure they do not rub or touch other
lines or surfaces? Have the fan blades been checked to make sure they turn freely? Are
the compressor hold-down bolts snug?
12) Have the door handles (if applicable) been properly installed?
13) Have the shelves been properly installed?
14) Has the end user been given the instruction manual, and instructed on how to operate
the appliance and the importance of the recommended periodic maintenance?
15) Has the end user been given the name and telephone number of an authorized service
agent?
16) Has the warranty card been filled out and forwarded to the factory for warranty
registration?
