Hoshizaki HFE-140B Series, Руководство по обслуживанию

Страница: 48 / 52

45
[b] THERMOSTAT
1) Unscrew the Thermostat attached to the Drain Tank bottom.
2) Cut the Thermostat leads at their connection.
3) To replace the removed parts, reverse the above procedure.
[c] THERMAL FUSE
1) Unscrew the Fuse Holder at the Drain Tank bottom, and remove the Thermal Fuse.
2) Cut the Thermal Fuse leads at their connection.
3) To replace the removed parts, reverse the above procedure.
5. AIR DUCT
[a] AIR DUCT
1) Remove the two or three screws at the front of
the Air Duct.
2) Hold both sides of the Air Duct, and pull it
forward. The Air Duct in the freezer
compartment is provided with a Gasket in the
Drain Pipe and must be pulled hard to remove.
3) To prevent tension on the wires, place the
removed Air Duct on a shelf.
4) To replace the Air Duct, first insert the Drain
Pipe into the drain outlet at the rear of the unit.
For the freezer compartment, move the
Gasket backward before inserting the Drain
Pipe.
5) Position the Air Duct to fit the six hooks on both sides. Keep the Air Duct slightly
forward for smooth positioning.
6) Lift up the Air Duct, and push it backward to fit in.
7) Tighten the screws at the front of the Air Duct.
Note: Be careful not to catch the Interior Fan Motor leads in the Air Duct.
Screw
Left Side View of Air Duct
To remove: (1) Pull forward. Air Duct will fall off.
To replace: (2) Position to fit hooks. (3) Lift up.
(4) Push backward.
Hook
Gasket
(1)
(2) (3) (4)