Hoshizaki HFE-127MA-CHD, Руководство по обслуживанию

Страница: 64 / 67

60
4. DOOR PARTS
[a] HINGE SPACER
For door closing adjustment, the hinge spacers may be provided between the hinges and
cabinet. When removed, the hinge spacers must be reinstalled in the correct position.
When the door is replaced or the gasket is often caught in the door, order the following
parts and replace the hinge spacers:
Hinge Spacer 473352M01
[b] LIFT HINGE
To ensure smooth door closing, the hinge shaft employs a lift hinge. If the hinge makes an
abnormal noise or the worn out lift hinge hinders smooth door closing, apply White Alcom
Grease or equivalent food grade grease. If the lift hinge is severely worn out, replace the
hinge collar (lift hinge) on both the door and hinge sides.
* Apply White Alcom Grease also when the door is replaced in the field.
[c] DOOR GASKET
To replace the door gasket:
1) Pinch and pull out the door gasket from the corners.
2) Push the convex of the new door gasket into the
concave of the door interior. Insert the corners first
to facilitate replacement.
Replacement of the door or door gasket may cause
a gap between the cabinet and the gasket. To correct
this gap, slightly heat the gasket with a drier. To avoid
melting the gasket:
1) Keep the drier at least 100 mm away from the
gasket.
2) Move the drier up and down to heat the entire gap.
Gasket
Gap
Min
100 mm