Hoshizaki HFE-127MA-CHD Скачать руководство пользователя страница 45

Страница: 45 / 67

3. Fan functions:

Fan relay closes when any of the following conditions is met.

a) Defrost temperature is higher than the fan stop temperature; Difference between room

temperature and evaporator temperature is more than the set difference.

b) Operation mode “0”; Compressor starts; Defrost thermistor temperature is lower than

the fan stop temperature; Fan delay time after defrost exceeds the set value.

c) Operation mode “1”; Under non-defrost mode, the defrost temperature is lower than the

fan stop temperature; Fan delay time after defrost exceeds the set value.

d) Operation mode “2”; When the compressor is running or during defrost cycle, the

defrost temperature is lower than the fan stop temperature; Fan delay time after defrost

exceeds the set value.

e) Operation mode “3”; Defrost temperature is lower than the fan stop temperature.

Fan relay opens when the following conditions are met.

a) Defrost temperature is higher than the fan stop temperature; Difference between room

temperature and evaporator temperature is less than the set difference.

b) Operation mode “0”; Compressor stops or defrost starts.

c) Operation mode “1”; Defrost starts.

d) Operation mode “2”; Compressor stops.

4. Alarm functions:

LED flashes and displays alarm information when the room temperature exceeds the

upper or lower alarm temperature limit and the set alarm delay time runs out.

LED displays “HHH” when the room temperature exceeds the upper limit of measured

temperature or the thermistor short-circuits and runs out of the thermistor error delay time.

LED displays “LLL” when the room temperature is lower than the lower limit of measured

temperature or the thermistor short-circuits and runs out of the thermistor error delay time.

5. Copy key operations:

Under the controller power-on mode, plug in the copy key and press the up key to display

“UPL”. At this time, press the set key to upload the parameters to the copy key. LED

displays normal temperature after uploading. Then, turn off the controller and unplug the

copy key. LED flashes and displays “err” if there is any error while uploading.

Under the controller power-off mode, plug in the copy key and turn on the controller. At

this time, the controller automatically detects the copy key and downloads the parameters.

LED displays “DOW” while downloading and “End” after downloading. Then, turn off the

controller and unplug the copy key. Restart the controller. LED flashes and displays “err” if

there is any parameter error or controller model error.

6. Key lock functions:

Under normal mode, press and hold the up and down keys at the same time for 10

seconds to turn on/off the key lock. At this time, LED displays the key lock on/off mode.

Release the up and down keys. LED displays normal temperature. All the parameters can

be checked but cannot be modified.

Содержание HFE-127MA-CHD




































































Результаты поиска

Содержание HFE-127MA-CHD

Отзывы:

Похожие инструкции для HFE-127MA-CHD

Бренды по названию

Популярные бренды

Hoshizaki HFE-127MA-CHD, Руководство по обслуживанию

Результаты поиска

Содержание HFE-127MA-CHD

Отзывы:

Похожие инструкции для HFE-127MA-CHD

Бренды по названию

Популярные бренды