Hoshizaki HFE-127MA-CHD Скачать руководство пользователя страница 40

Страница: 40 / 67

Operations

1. Under temperature measuring and controlling status:

1) Press the set key for 3 seconds:

When the keypad password is set as “0”, the set indicator light comes on and the screen

displays the “F01” menu. There is no password authentication, so directly enter the

menu mode to set parameter.

When the keypad password is not set as “0”, the set indicator light flashes and the

screen displays “00”. Press the up or down key to input the password. Press the set key

to confirm the password input. Then, the system enters the menu setting status if the

password is correct. If the password is incorrect, the set indicator light goes off and the

system goes back to the normal measuring and controlling status.

2) Parameter check:

Press the up key. The set indicator light flashes and the screen displays the set point

temperature.

Press the down key. The set indicator light flashes and the screen displays the

temperature of the evaporator sensor.

2. After entering the menu setting status, press the up or down key to choose the desired

menu item (from F01 to F09).

3. After choosing the desired menu item, press the set key to set parameter value. Press

the up or down key to adjust parameter value, and then repress the set key to go back

to the menu setting status.

4. Under the setting status, press the defrost/reset key or perform no operation for 30

seconds. The system will save the parameters and exit from the parameter setting

mode.

5. Press the defrost/reset key for 3 seconds to start or stop the manual defrost cycle.

Output Control

1. Compressor:

The compressor starts up when the delay time runs out, if the measured temperature is

higher than the “fixed temperature value + temperature return difference”.

The compressor stops running when the measured temperature is lower than the set point

temperature.

2. Defrosting:

Defrosting starts automatically according to the defrost cycle setting, or can be started

manually. If the evaporator sensor is activated and the evaporator sensor temperature is

higher than the defrost termination temperature, the manual start is not available.

Содержание HFE-127MA-CHD




































































Результаты поиска

Содержание HFE-127MA-CHD

Отзывы:

Похожие инструкции для HFE-127MA-CHD

Бренды по названию

Популярные бренды

Hoshizaki HFE-127MA-CHD, Руководство по обслуживанию

Результаты поиска

Содержание HFE-127MA-CHD

Отзывы:

Похожие инструкции для HFE-127MA-CHD

Бренды по названию

Популярные бренды