horsch Partner 1600 FT, Руководство по эксплуатации

Страница: 51 / 69

Care and maintenance
CAUTION
Please observe the safety notes on care and
maintenance!
Your machine has been designed and built to
offer maximum performance, economy and
operator friendliness under a vast variety of
operating conditions.
Before delivery the machine was examined in
the factory and by your dealer to make sure
that it is in optimal condition. For trouble-free
operation it is very important to carry out the
necessary work for care and maintenance at
the recommended intervals.
Cleaning
Clean the machine thoroughly at regular inter-
vals and after the end of the season.
NOTE
Do not clean electrical components and fan or
hydraulic cylinders and bearings with a high
pressure cleaner or direct water jet. Housings,
screw fittings and bearings are not water proof
under high pressure.
¾
Clean the outside of the machine with water.
Open the fall sluice under the metering unit
so that entered water can flow off.
¾
Clean the cell wheel inside the metering unit
with a brush and compressed air.
¾
Blow out coulters, seed lines, seed hopper,
metering unit and fan with compressed air.
¾
When using fertiliser clean and rinse the
components thoroughly. Fertilisers are highly
aggressive and can cause corrosion.
Maintenance intervals
The maintenance intervals are determined by
many different factors.
For example, the different operating conditions,
weather impact, travel and working speeds, dust
accumulation and type of soil, seed, fertiliser
and dressing used, etc. affect the maintenance
intervals. The quality of the lubricants and
cleaning agents also affects the time to the next
care work.
The specified maintenance intervals therefore
only serve as a reference.
In case of deviations from normal operating
conditions the intervals must be adapted ac-
cordingly.
Regular maintenance is the basis for a fully
operable machine. Properly serviced machines
reduce the risk of failing and ensure economical
use and operation of the machines.
Storage
If the machine is to be shut down for a longer
period of time:
¾
If possible, park the machine under a roof.
¾
Completely empty and clean the seed and
fertiliser hopper.
¾
Unplug the terminal and store it in a dry place.
¾
Protect the machine against corrosion. For
spray coating use only biodegradable oils.
NOTE
Do not spray the plastic and rubber parts with
oil or corrosion protection agent. These parts
would become brittle and break.
47