horsch Focus 7 MT, Руководство по эксплуатации, Страница: 64 / 78

Conversion of the number of
rows
The hose installation is in any case prepared for
the full coulter equipment.
If only half the coulter equipment is used, two
hoses each care connected to one seed coul-
ter. The hoses are in this case connected with
Y-unions.
¾
For extending the coulter equipment, every
second coulter must be installed.
¾
Remove the Y-unions, connect one hose to
the already present coulter, connect the other
hose to the newly installed coulter.
¾
Proceed in reverse order when converting
from full to half the coulter equipment.
Conversion from rape to grain bar
¾
Lift the machine with appropriate means.
¾
Open the screws on the consoles of the
packer frames.
Positions of the consoles
Consoles
¾
Move the packer frames using suitable lifting
equipment. Turn the rods for this purpose until
the desired position of the packer frames has
been reached.
¾
Refer to the respective drawings for the setting
dimensions of the rods.
¾
Fasten the screws on the consoles of the
packer frames again.
¾
Mount the additional packer element on the
right packer:
Mounting the additional packer element
CAUTION
Risk of accident and machine damages.
¾
Note the changed machine height due to the
conversion.
60