horsch Finer SL, Руководство по эксплуатации

Страница: 45 / 58

60056796 • 002 • 07/2021 • en 45
8 Care and maintenance
WARNING
Risk of injuries during maintenance work
Ø Observe the safety notes on care and maintenance!
Ø
Shut down the tractor and secure it against reactivation. Lock manual control
units in the locked position.
Ø Secure the machine against lowering and unexpected movements.
Ø
Never stay under unsecured, raised machine parts.
Ø
Carry out maintenance work on or under raised machine parts only if they are
mechanically supported with suitable means.
Ø Secure machine parts against falling when dismantling them.
The machine has been designed and built to offer maximum performance, economy
and operator friendliness under a vast variety of operating conditions.
Prior to delivery, the machine was checked at the factory and by the HORSCH sales
partner to ensure the optional condition of the machine.
To maintain troublefree operation it is important to carry out the care and mainten-
ance work at the recommended intervals.
8.1 Maintenance overview
The maintenance intervals are determined by various factors.
Different conditions of use, weather influences, working speeds and soil conditions
affect the maintenance intervals. The quality of the lubricants and care agents also
affects the time to the next maintenance activities.
The specified maintenance intervals therefore only serve as a reference. In case of
deviations from normal operating conditions the intervals for the due maintenance
tasks must be adapted accordingly. The
daily maintenance interval designates main-
tenance on each working day before working with the machine.
Regular maintenance is the basis for a fully operable machine. Properly serviced ma-
chines reduce the risk of failing and ensure economical use and operation of the ma-
chines.
8.1.1 After 10 operating hours
Maintenance location Work instructions
All threaded, plug, and hy-
draulic connections Retighten all threaded, plug and hydraulic connections.
Event tight threaded and hydraulic connection may become loose due to material de-
terioration or paint residues between the threaded joints or unions.
Retighten all wheel nuts
M18 x 1.5 – 300 Nm
[221 ft.lb]
M22 x 1.5 – 510 Nm
[376 ft.lb]
Initially after 10 hours or 31 mi.
Again after 10 hours or 31 mi.
Tighten daily after this