horsch Finer SL, Руководство по эксплуатации

Страница: 43 / 58

Operation | 7
60056796 • 002 • 07/2021 • en 43
1. Lift the machine completely.
2. Operate the control unit for depth setting and fully extend all cylinders.
Continue holding pressure on the control for approx. another 5 seconds, until
all cylinders are fully extended and filled.
3. Repeat this procedure 2 - 3 times.
Setting the depth
4. Lower the machine in the field.
5. Operate the control unit for depth setting and lower the machine to the de-
sired working depth.
6. Switch the control unit for depth adjustment to locked position.
7.4 Use in the field
7.4.1 Work instructions
NOTE
Please note:
Ø
The machine must be in horizontal position when used in the field.
Ø
The upper link of the three-point hydraulics must rise slightly toward the
tractor.
Ø
Do not drive backwards with the machine lowered. The components are not
designed for this and could be damaged.
1. Unfold the machine in the field and adjust; see chapter Depth setting .
2. Align the machine horizontally with the upper link arm.
7.4.2 Headland
Ø
Lift the machine before turning at the headland.
7.4.3 Checks
The working quality essentially depends on the adjustments and checks made prior
to and during use, as well as on regular care and maintenance of the machine.
Ø Carry out all maintenance tasks and adjustments before starting to work.
NOTE
Ø
Perform checks when starting work and with larger fields also regularly in
between!