NOTES:
•
The maintenance interval
Daily
designates maintenance on each working day before working with the machine.
•
Follow additional maintenance notes in the respective chapters.
Maintenance location
Work instructions
Interval
Complete machine
Drive unit / gearbox
Oil change, see below
100 h
Check oil level, see
Oil change in gearbox
40 h
Lighting and warning boards
Check condition and function
prior to
use
Warning and safety stickers
Check that they are in place and legible
prior to
use
Tines
Check for cleanliness, condition and wear, see chapter
Tines
40 h
Packer roller
Check for condition and wear, see chapter
Packer roller
40 h
Propshaft
Pay attention to the operating instructions for the
propshaft!
Coulter
Rubber mounting
Check condition and replace if aged or showing reduced
tensioning force.
40 h
Coulter discs
Check state, wear, bearing play and light movement. The
discs must be rotatable by hand.
40 h
Press rollers
Check for condition, firm seating and wear
prior to use
Scrapers on coulters and press rollers
Check condition, setting and state of wear
prior to use
Harrow
Check condition, tightness, setting and state of wear
prior to use
Screw adjustment
Check setting and light movement, lubricate screw
prior to use
Pneumatic system
Fan, seed hoses and fall sluice
Leaks, crushing and chafing points, blockage
daily
Distributor
Check for leak tightness, blockage, clean the distributor
daily
Safety installations
Lighting and warning boards
Check condition and function
daily
Warning and safety stickers
Check that they are in place and legible
daily
At the end of the season
Complete machine
Clean the machine
Perform care and cleaning work; do not spray plastic parts with oil or similar
Spray the piston rods of the hydraulic cylinder with a suitable corrosion
protection agent
Check all screw and plug-and-socket-connections for firm seating (see
torque table)
Check frame and connecting parts for condition and firm seating
Check electrical lines for damage and replace, if necessary.
Mounting of rotor
Check condition and function of cotter pins
Tines
Replace worn or damaged tines
(Wear dimension: tine length < 150 mm)
Scrapers
Replace worn or damaged plates
Propshaft
Dismantle and service. Pay attention to the operating instructions for the
propshaft!
Tractor link arm shaft
for wear
55